Vlieseline Edge Tape is designed to stop your fabrics stretching where they shouldn't - its stay stitching on a roll!
It is very soft and low-stretch and is easily ironed into shape. It can be used everywhere that stretch must be avoided, it stabilises front edges, armholes and lapels on jackets and coats. Other application areas include pocket openings, vents, hems and other edges.
You can use this on curves, but Vlieseline's Bias tape (listed separately) will be easier to work with.
Washable at up to 40 degrees and dry cleanable.
- Lay the tape on top of the back of your fabric, bumpy side of the tape facing the fabric, and create the desired shape.
- Lightly iron, about 8 seconds in each area. For rounded edges, crimp the tape into small pleats and press into the desired shape.
- Do not cut notches as this could cause the stabilising strengthened grain to fray.
- Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly.
This tape is 20mm wide and sold in pre-cut 5 mtr packs on reusable ribbon cards.
- Availability: In Stock